De Paddock
- Direct Access -
De Paddock Modelbouw Forum
De Paddock Autosport Forum

Go Back   De Paddock > De Paddock Modelbouw > Modelbouw - Groep build 2015
Home
Home FAQ Members List Calendar F1 Prono Today's Posts Links

Reply
 
Thread Tools Rate Thread
  #1  
Old 12-05-2015, 13:49
Cusco Cusco is offline
De Paddock Rookie
 
Join Date: Feb 2013
Location: Genk
Posts: 182
2004 Williams BMW FW26 Walrus nose (papier)

Geschiedenis :

The Williams FW26 is a Formula One racing car designed and built by Williams F1 for the 2004 Formula One season. The design team was led by Patrick Head, Gavin Fisher and Antonia Terzi. It was driven by Ralf Schumacher and Juan Pablo Montoya and proved to be one of the most attention grabbing cars of the season. The FW26 was powered by a BMW 3.0 V10 engine, one of the most powerful in F1 at the time.

Williams had finished 2003 with arguably the strongest package overall, and great expectation was on the team to win both titles in 2004, having come so close the previous year. To this end, Head supervised the car with the aim of being on the pace immediately, whilst his design team came up with a revolutionary aerodynamics package. The car featured a radical front section, nicknamed the 'Walrus nose'. It featured a short, stubby nosecone connected to the front wing by sloping vertical spars which allowed more airflow to the underside of the car. In an effort to maximise the airflow, the front suspension was designed around the twin keel principle, pioneered by Sauber and also used by McLaren and Jordan.

The FW26 proved fast in pre-season testing and Montoya was tipped as a title favourite, but during the season proper the car proved difficult to set up and was inconsistent, with Montoya and Schumacher both struggling to maximise the car's potential. The car was genuinely outpaced by the Renaults and BARs of that time, as well as the Byrne/Brawn-designed Ferrari F2004, which dominated much of the season. This meant the team was largely in the upper midpack among the competition this year, but not in contention for the title.


Juan Pablo Montoya FW26 in the Donington Grand Prix Exhibition.
The mid-season was especially barren. The cars were disqualified from second and fifth place finishes in Canada for running brakes that infringed the technical regulations, and Schumacher suffered a heavy crash at Indianapolis, sidelining him for three months. His replacements, Marc Gené and Antônio Pizzonia could do little with the car and it was left to Montoya to defend Williams' honour.

The team redesigned the front end of the car in time for the Hungarian Grand Prix and fitted the car with a more conventional nosecone. This helped bring an upsurge of competitiveness to the car and gave Montoya a needed boost. He rounded off the season with a win in Brazil, whilst the returning Schumacher put in strong drives in Japan and China. They eventually finished fourth in the constructors standings, just behind Renault, making 2004 the worst season for Williams since 1999. Both drivers left at the end of the season, and the replacement FW27 was designed to be a far more conventional car for the following year. Following Montoya's win in Brazil, Williams would not score another until eight years later at the 2012 Spanish Grand Prix, which was won by Pastor Maldonado in the FW34.

The FW26 was the last Williams Formula One car that was designed under the supervision of longtime Williams technical director Patrick Head.

Ik ga deze dus maken in papier in de setting van J.P. Montoya. Hij wordt zo'n 30cm lang en bevat best wat detail.

Uitgeprint :



Eerste stappen uitgesneden :



Kantjes gekleurd, gerild, gevouwen en geplakt :

Reply With Quote
  #2  
Old 12-05-2015, 20:05
Dominique's Avatar
Dominique Dominique is offline
Frecking Nuts ...
 
Join Date: Dec 2004
Location: Thuis
Posts: 3,015
Nou moe?

Indrukwekkend toch die papieren modellen. Moet ik volgende keer toch eens van kortbij komen loeren.
__________________
Groetjes,
Domi.
Reply With Quote
  #3  
Old 18-05-2015, 09:48
Cusco Cusco is offline
De Paddock Rookie
 
Join Date: Feb 2013
Location: Genk
Posts: 182
Ondertussen zijn we weer een paar stappen verder

Voorste sneeuwschep is geplaatst samen met voorwielophanging. Vooral de ophanging in vorm krijgen heeft mijn woordenschat wat uitgebreid



Cockpit is klaar voor plaatsing in de wagen.




Volgende op de lijst is de onderkant met de diffuser.
Reply With Quote
  #4  
Old 30-05-2015, 09:00
Cusco Cusco is offline
De Paddock Rookie
 
Join Date: Feb 2013
Location: Genk
Posts: 182
Ondertussen is hij bijna klaar. Ik ben vergeten om ondertussen nog foto's te maken, dus daarom even de voorlopige eindfoto's.

De ophanging recht krijgen was een hele uitdaging en het is nog niet 100%, maar dit is het beste wat ik er van krijg. Dit is wat een nadeel van papierbouw.

De wielen zijn niet naar mijn goesting. De manier waarop de ontwerper de wielen in elkaar wil laten zetten vind ik geen mooi resultaat opleveren. Ik ga deze opnieuw maken zodra ik terug fotopapier heb.

De foto's :





Reply With Quote
  #5  
Old 30-05-2015, 09:50
Kevinboodts's Avatar
Kevinboodts Kevinboodts is offline
De Paddock Rookie
 
Join Date: Oct 2013
Location: Hamme
Posts: 120
Fantastisch gewoon
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 14:04.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.